Poxy floor Kit 25m2

Poxy floor kit is two-part epoxy flooring system for indoor concrete, supplied as a primer/sealer + pigmented wearing topcoat.

The kit includes:

• Epoxy Plus (2K epoxy primer/sealer) – a high-solids, low-viscosity primer applied at roughly 0.2–0.5 kg/m² (substrate dependent) to seal and strengthen prepared concrete; it’s typically recoated once dry to touch and within 24 hours.

• EP Coat 100 (2K pigmented, 100% solids epoxy topcoat – RAL 7001) – a glossy, rigid wearing layer typically applied at ~1.0 kg/m², giving about 25 m² coverage per kit for the full system (primer + 1 topcoat), depending on porosity and film build

• one squeegee
• 2 brushes

Poxy floor Kit

 It’s intended for flat, clean, dry, mechanically prepared concrete (minimum pull-off strength 1.4 N/mm²). Typical return to service is light traffic after 24–48 hours, with final hardness around 7 days (avoid water contact until fully cured).