Lava Detail 20

Owl Lava DETAIL  

Owl Lava Detail 20 is a single component, liquid-applied, polyurethane multi-purpose waterproofer for complex roofing detail structures. Permanent elastic, reinforced by fibers. It is used to waterproof details on roofs like exhaust pipes, light domes, gutters, flashings etc.  This product can be applied in temperatures down to 0°C. 

Due to its unique formation, it cures rapidly to form a bubble-free thick layer membrane with excellent mechanical properties.

Lava Detail 20 is ideal for the waterproofing and protection of flashings, wall-floor connections, chimneys, pipes, photovoltaic systems, air conditioning units and gutters.

• No reinforcement necessary
• Fast curing. Skin formation time of 2 hours at 20ºC
• Bubble and defect free membrane
• Excellent weather and UV resistance
• Excellent thermal resistance, the product never turns soft. Recommended service temperature 80ºC, max shock temperature 200ºC
• Resistance in the cold - remains elastic even down to -40ºC
• Excellent mechanical properties, high tensile and tear strength, high abrasion resistance
• Good chemical resistance

Owl Lava Detail 20 is ideal for use during the winter months or in climates with relatively low humidity. Not recommended for unsound or structurally deteriorated substrates.

Application

All substrates must be primed with Owl Primer prior to application of the Owl Lava 20 Detail .

Lava20 Detail can be successfully applied to concrete, fibrous cement, mosaic, cement roof tiles, old (but well adhered) acrylic and asphalt coats, wood. For information about other substrates please contact our technical department.

Apply by brush, spatular, notched trowel/squeegee. Minimum consumption +/- 1.8kg/m2

Technical Details

• Volume Solids: 90%
• Viscosity: 5000 - 7000 cP
• Flash Point: 42°C
• Tack Free: 2 - 3 hours at 25°C
• Overcoatable: Minimum of 6 hours to 48 hours at 25°C
• Clean tools and equipment with paper towels and then use PU Solvent.
• Can be kept for minimum 12 months in the original unopened cans in dry conditions and at temperatures of 5-25ºC. Once a can has been opened, use as soon as possible.
• Available in  6kg , 1kg

Data sheet