Primer - Bitumen Activating VCL

Approximately coverage 60m2

DESCRIPTION

AREXOL LAC is a high standard one-component, bituminous, solvent-based solution. In its final form (solid) it creates a black,

glossy watertight film, with excellent adhesion and high penetration on surfaces, highly resistant to low concentration acids and bases.

PRIMARY USES AREXOL LAC

is used mainly as a primer for bonding bituminous waterproofing membranes as well as for the anticorrosion

protection of metal and waterproofing and protection of concrete constructions, even protecting wooden surfaces submerged in the ground against humidity.

It is not compatible with polystyrene, due to existence of solvents. 

APPLICATION

The surface must be clean, free of oils, grease, moisture, and any residues, prior to use. It can be applied with a bristle brush, paint roller or by airless spray.

For even better results, it can be applied in two layers. Allow each coat to fully dry and then apply in a crossed over manner. For bonding bituminous membranes,

one coat is adequate which needs to be fully dried before applying blowtorch (usually 24h for the solvents to evaporate).

If necessary, AREXOL LAC can be diluted with a small quantity of Xylol. If the material is to be remain exposed to sunlight for a long period of time,

it is recommended to be protected with bituminous aluminum paint RECTIFLEX. Do not apply AREXOL LAC in direct sunlight exposure and during rainfall.

Protect the fresh applied material from immediate rainfall during curing.