Primer - Bitumen Activating VCL

Approximately coverage 30m2

Introduction

TN SK TOL® is a bituminous activating primer for use with self-adhesive membranes on all types of substrates.

Application Areas

TN SK TOL® is used as a primer with particularly good adhesion properties e.g. on reinforced concrete, porous

concrete, masonry, plaster, steel profiled sheets or plastic. It can form a very good bonding bridge to the hot or

cold applied bitumen bonding in the build-up of a flat roof and the waterproofing of buildings.

Application The surface that is to be primed needs to be clean and dry. Oil, grease and any loose particles have to be removed

and any imperfections need to be repaired before application can commence. TN SK TOL® can be applied to the

prepared surface using a brush, roller or suitable sprayer. Allow the product to completely dry before any further

work commences. Due to the fact that the formulation contains solvents, suitable health and safety precautions

should be taken and the product should not be used in closed rooms or similar enclosed spaces.

Storage

Store in a cool, dry place protected against sunlight at a temperature between -20°C and +30°C. Keep away from

sources of ignition and dispose of any unused contents responsibly (never into sewer water).

Guaranteed storage period — 12 months.