Owatrol Oleofloor Natural 1L
Owatrol Oleofloor Natural 1L
37.52€

Owatrol Oleofloor Natural 1L

   0 reviews
Product Code:
Availability:
OW283
In Stock
37.52€
Ex Tax: 30.50€

Owatrol Oleofloor Natural 1L

Owatrol Oleofloor Natural is a water-based oil, enriched with vegetable oil and combined with polyurethane resins to give a hardwearing, natural rich matt finish to any wooden floor. Enhancing the natural beauty of the wood Owatrol Oleofloor Natural gives long-lasting protection, while its excellent penetrating qualities mean it nourishes the wood.

Having superior chemical and water resistance Owatrol Oleofloor Natural is the perfect solution for kitchens and bathrooms while being ideal for staircases, lounges and other similar rooms, where a natural finish is desired.

Quick drying and easy to apply Owatrol Oleofloor Natural is the solution, where the quick turn round of a room is needed.

Ideal uses for Owatrol Oleofloor Natural

  • Ideal on bare wood or previously oiled surfaces.
  • Great for use in areas with heavy traffic.
  • Owatrol Oleofloor Natural enhances the natural beauty of the wood.
  • Excellent penetration.
  • Nourishes the wood.
  • Excellent resistance to abrasion and chemicals, including ammonia based products.
  • Water repellent.

Surface preparation

Surfaces must be dry, clean, free of dirt, grease and other surface contamination including previous coatings.

Owatrol Oleofloor Natural can only be applied to bare wood surfaces or wood surfaces previously finished with Oleofloor Natural or

other wood flooring oils. ALL other finishes MUST be completely and thoroughly removed.

Application

  • Apply 1 or 2 coats of Owatrol Oleofloor Natural depending on the type of wood and foot traffic.
  • Facing the light and starting opposite the door so as to work towards it, apply a first even and a generous coat of Owatrol Oleofloor Natural
  • Start at the edge then do the entire surface, working in areas of 2 meters by 2 meters.
  • Allow to dry for 4 hours depending on the ambient conditions.
  • Apply 2nd coat if required.
  • Do not leave more than 12 hours between application of the 1st and 2nd coat.
  • Always maintain a wet edge to avoid overlaps.


DATA SHEET

Reviews (0)

   0 reviews
Write a review
Tags: owatrol, oil,
Related Products