Owatrol Net-trol
Owatrol Net-trol
31.97€

Owatrol Net-trol

   0 reviews
Product Code:
Availability:
11210
In Stock
31.97€
Ex Tax: 25.99€

Available Options

Owatrol Net-trol

Net-Trol is a powerful wood cleaner and brightener which restores greyed and weathered wood to its natural colour without damaging the wood’s fibres. It effortlessly removes both surface and ground in dirt leaving the wood looking bright and vibrant. Net-Trol is fast-acting and can restore the original colour of your wood surface in as little as 15 minutes with no laborious and backbreaking sanding!

Benefits of using Net-Trol

It is safe to use on all exterior wood types and is also an excellent degreaser for use on tropical hardwoods to allow finishes like Deks Olje D1 to penetrate. Net-Trol can remove stains caused by tannin bleed and will remove all traces of weathering caused by mildew, pollution and UV rays. It will also neutralise wood surfaces that have been stripped with a stripping product such as Owatrol’s Dilunett or Prepdeck, leaving the surface ready for applying your chosen finish.

Net-Trol is not only for use on wood surfaces though – you can also use it to restore the lustre to faded plastics dulled by weathering and UV rays. It can also be used to remove rust stains and to clean discoloured stone and cement. Net-Trol is biodegradable and does not contain solvents or bleach. It’s not harmful to plants and shrubs so it’s safe to use in the garden!

Ideal Uses for Net-Trol Wood Cleaner:

  • Reviving neglected fence panels
  • Cleaning greyed wooden garden furniture
  • Restoring the colour of decking and cladding
  • Brightening faded plastic guttering
  • Removing rust stains from cement and brickwork
  • Cleaning discoloured paving slabs and driveways
  • Removing stains caused by tannin bleed
Application of Net-Trol Wood Cleaner & Colour Restorer

Application tools

  • Soft brush
  • Stiff bristle/nylon brush
  • Pressure washer
  • Wear chemical resistant gloves, safety goggles and protective clothing

Caution: Surfaces may be slippery when wet. Use caution when walking on wet surfaces during application. Net-Trol may dull painted surfaces and some metal fixings if left on to long. Rinse off quickly or wipe with a wet cloth.

To use Net-Trol on wood:

  • First wet the surface with fresh, clean water
  • Apply Net-Trol with a synthetic brush or roller (medium or long pile)
  • Scrub the surface with a stiff nylon/synthetic brush
  • Leave to stand for approx 10-20 minutes. If the surface starts to dry, dampen with a mist application of water
  • Scrub the surface whilst rinsing with water or use a pressure washer (max. 60 bar)
  • If required repeat the procedure
  • Allow to dry for 48 hours or until it meets the moisture content required by the chosen finish before finishing

To use Net-Trol on stone or concrete:

  • First wet the surface with fresh, clean water
  • Apply Net-Trol with a synthetic brush or roller (medium or long pile)
  • Scrub the surface with a stiff nylon/synthetic brush
  • Leave to stand for approx 10-20 minutes. If the surface starts to dry, dampen with a mist application of water
  • Scrub the surface whilst rinsing with water or use a pressure washer (max. 60 bar)
  • If required repeat the procedure
  • Allow to dry until it meets the moisture content required by your chosen finish or sealer

To use Net-Trol on nail stains:

  • First, clean the surface
  • After cleaning wet the surface with fresh clean water
  • Apply Net-Trol to the entire surface over and around the nail stain
  • Do not rinse until the stain has disappeared

To use Net-Trol on plastic or GRP:

  • First, wet the surface with fresh clean water
  • Apply Net-Trol using a brush
  • Leave it to work for 10 minutes
  • Scrub the surface with a soft or medium nylon scrubbing brush
  • Rinse with large amounts of fresh clean water

To use Net-Trol on rust stains:

  • First, wet the surface with fresh clean water.
  • Apply Net-Trol with a stiff nylon scrubbing brush working it into the rust stain
  • Leave to work for 10 minutes
  • Scrub surface with a stiff nylon scrubbing brush
  • Rinse with large amounts of fresh clean water
Clean Up

Clean all tools used with soap and water.

After Clean Up

We recommend protecting and enhancing the natural beauty of your wood with Owatrol penetrating wood finishes.

Things to Remember

  • Shake container thoroughly before use.
  • Cover any areas you want to protect.
  • Thoroughly wet surrounding plants and shrubs.
  • Apply between 5˚C and 35˚C.
  • Do not apply on a hot surface as the product will dry too quickly.
  • If cleaning vertical wood, work from bottom to top to avoid streaking

Coverage:          5-10m2 per litre

Suitable for:      Exterior use

Clean up:           Soap and water

Working Time:  10-20 mins


DATA SHEET


Product video

Reviews (0)

   0 reviews
Write a review
Tags: Owatrol, cleaner,