Sikagard 6060 S Aerosol
Sikagard 6060 S Aerosol

Sikagard 6060 S Aerosol

   0 reviews
Product Code:
Sikagard 6060 S Aerosol
In Stock
Ex Tax: 9.66€

Sikagard®-6060 S Aerosol(500ml) is a fast-drying, bitumen-based quick repair protective coating  with very good rust-proofing and sound deadening properties. It is suitable for an effective vehicle underbody protection. Sikagard®-6060 S can be sprayed haze free without any cob webbing and does not drip.
Sikagard®-6060 S shows good adhesion on different paints, metal primers, metals and PVC without any pre-treatment.
A tough coating remains after drying, protecting metal from corrosion.  


  • Equipment independent (aerosol). Easy to use.
  • Outstanding application properties (no running or dripping)
  • Good adhesion performance to a wide variety of substrates
  • Excellent acoustic and damping properties
  • Fast drying
  • Road salt resistant
  • High solid content


Sikagard®-6060 S is a spray applied anti-corrosion coating for quick repairs of non-visible areas such as wheel arches and underbody parts of vehicles that do not need to be over painted.
This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.  

Application Information

Surface Preparation

Surfaces must be clean, dry and free of rust, dust and grease. Bare metal substrates must be pre­treated to enhance corrosion resistance (e.g. uncoated steel, etc).


        Shake can approx. 40 times before use. Cover adjacent surfaces prior the spray process. Spray at room temperature and from a distance of approx. 25 cm in an grid motion to build up a continuous coat.

        Sikagard®-6060 S can be applied without dripping. If a thick layer is required, let layers dry in between. Hold the can in an upright position and do not spray on parts of the brake, engine or exhaust system.

        After use, invert can and spray in short bursts to clear nozzle.


              Uncured Sikagard®-6060 S can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once dried, the material can only be removed mechanically. Hands and exposed skin shall be washed immediately using hand wipes such as Sika® Cleaner-350H or a suitable industrial hand cleaner and water.

              Do not use solvents on skin.


                    Sikagard®-6060 S cannot be overpainted.

                    Reviews (0)

                       0 reviews
                    Write a review
                    Tags: sika, sikagard,